lookiarchitecture.blogg.se

Dot logsheet
Dot logsheet











dot logsheet
  1. Dot logsheet serial#
  2. Dot logsheet drivers#
  3. Dot logsheet update#
  4. Dot logsheet driver#

  • Error details have been removed, only ERROR is returned.
  • Removed some commands and options to reduce firmware size.
  • Use higher datarates before trying SF11 or SF12 for joining.
  • AU915 rejects downlink when Downlink Dwelltime is enabled for 400ms max time-on-air.
  • Class A timeout if packet received in Rx1.
  • LoRaWAN Certification Test App for LCTT in debug firmware.
  • Dot logsheet serial#

  • Serial buffer was reduced to 256, data can be lost if flow control is not implemented.
  • Jump straight to application when reset from deep sleep (reduces XDot start-up time from sleep).
  • Erase command now erases only the file system area of flash unless “all” is specified.
  • Fixed issue where accessing files and sleeping in different threads would cause the MDot to lock up.
  • XDot - check for external flash only when starting a FOTA session to reduce start-up time.
  • Dot logsheet update#

  • Update ChannelPlan_AU915.cpp - add max payload values for DR8-DR13 when DownlinkDwelltime is set to true.
  • Ability to set trigger for WAKE pin as rising, falling, or either.
  • If inadequate space is available files are removed.
  • FOTA session now checks file system for space required to complete file download and upgrade process.
  • Ability to save a backup of protected settings (Device ID, Network ID, Network Key, and Gen App Key) in MDot One-Time-Programmable storage.
  • Added AT command to get and set duty-cycle.
  • Increased serial buffer to 512 and moved into the heap area of RAM, fixes lost bytes seen when using AT+SENDB up to max payload.
  • BugFix: Sleep for more than 4294 seconds.
  • To change channel plan when GLOBAL firmware is used.
  • New Feature: Global Channel Plan US915,EU868,AU915 and AS923 (1,2,3,4,JAPAN1 and JAPAN2).
  • FUOTA - Fragmentation and Multicast Setup v1.0.0.
  • Up to date firmware and change log available at Github 4.1.5 ¶

    dot logsheet

    See the Dot Library change log for Dot Library changes, fixes, and issues.Ĭhanges in versions 3.x.x and onward apply to mDot and xDot unless explicitly specified.

  • Certificate of Training-Entry-Level Training $0.For versions 3.x and forward, this change log will only list changes, fixes, and issues for the AT Firmware itself.
  • Annual Inspection Report with Appendix G $0.00 Add to cart.
  • Dot logsheet driver#

  • Certificate of Driver Road Test $0.00 Add to cart.
  • Note: This form is available in an excel format upon request for those who would like to customize it to their operation. This form meets the requirements for the time sheets described in item number 5 above. The driver records his/her hours on a time sheet which shows at least start time, end time, and total hours each day. The driver must be within all of the 395.3 hours limitsĥ.

    dot logsheet

    Dot logsheet drivers#

    The drivers must have had a full 10 hour break (8 hours for passenger vehicle drivers) between each 12 hour shift.Ĥ. CDL drivers must return within 12 consecutive hours.ģ. The driver returns to his/her work reporting location and are released from work. Non-CDL drivers stay within 150 air mile radius.Ģ. The CDL drivers stay within a 100 air mile radius of their work reporting location. All drivers of commercial motor vehicles are excepted from preparing logs if they can meet the following conditions:ġ.













    Dot logsheet